Your furnace is one of the most important elements in your home, but it’s also one of the most neglected. You probably don’t think about your gas furnace until it starts acting up. That’s when you realize how much you rely on it to keep your home warm and comfortable all year long.
If you’re like most people, though, you don’t know how often to clean your gas furnace – or even what kind of furnace maintenance needs to be done on a regular basis. If this describes you, then this article is for you.
In this article, we’re going to walk through how to clean furnace every year and when to do that so that your furnace is always running at its best.
Common Problems When A Furnace Tune-Up Is Not Done
If you live in Calgary, US, there’s a good chance that your furnace hasn’t been tuned up for a while. When your furnace isn’t properly maintained, you can run into a number of problems. Here are some common issues that occur when you don’t have your furnace tuned up:
- Reduced Energy Efficiency
As time passes, furnaces can start to lose their efficiency, which means they’re not as efficient at heating your home as they could be.
- Poor Heating Performance
Furnaces usually have filters that remove dust and other contaminants from the air before it’s heated and distributed throughout your home – if those filters get dirty or clogged up, they won’t be able to do their job properly anymore, which means that you’ll need to rely on other techniques of heating (like space heaters) more often than not.
- Increased Risk of Fires or Carbon Monoxide Poisoning
If your furnace isn’t working properly, there’s a good chance it will break down completely at some point—and when this happens in an enclosed space like in your home or office, there’s an increased risk for carbon monoxide poisoning or even fire.
- Increase the Risk of Breakdowns
A furnace that has not been tuned up regularly will have parts that are older and can be more likely to fail. This could cause your furnace to break more often than it should.
- Safety Hazards
If your furnace has not been tuned up, it could be putting you and your family at risk for carbon monoxide poisoning. This is because when a furnace does not work properly, it will release more carbon dioxide into your home than usual. Carbon dioxide is poisonous, so breathing too much of it in your home could make you sick or even kill you.
- Poor Indoor Air Quality
Furnace tune-ups are often recommended to maintain the quality of your home’s air. If your furnace is not properly tuned, it could be emitting a lot of dust and debris that could be harmful to the health of you and your family. This is especially true if you have allergies or asthma.
- Warranty Issues
Maintaining your furnace will help ensure it lives up to its warranty and can be replaced if something goes wrong. Without regular maintenance, there’s a chance that the manufacturer will refuse to honor the warranty due to neglect on your part.
When is the Best Time to Clean Your Gas Furnace?
Your gas furnace is an important part of your home’s heating system. It’s also one of the most expensive components of your home, so it’s essential to keep it in good condition. If you’re having problems with your furnace, check out these signs:
- Reduced Airflow
A blocked filter will reduce airflow and cause your unit to work harder, which can lead to other problems. If you notice a reduction in furnace performance, check the filter first.
- Uneven Heating
If your home isn’t evenly heated (particularly in areas where there are multiple rooms), this is a sign that the blower motor needs replacing or repair. If you have uneven heating problems, contact a technician in Calgary as soon as possible for help diagnosing and fixing the issue.
- High Energy Costs
If your gas bill is higher than usual during certain parts of the year (such as when it’s colder outside), this may indicate that your system needs servicing or repair. A technician can help determine if this is the case by performing an inspection of its components and providing recommendations based on what they find.
- Persistent Dust And Dirt
If dust and dirt are constantly building up in your home, it could be because there’s a problem with your heating system—and that problem could be affecting your health! Have dust bunnies formed on top of vents and air ducts? Wondering which companies clean furnaces and duct cleaning with Brush Calgary? Call ClearView Services today.
- Strange Odors
There are certain odors that come with living in a house: wood smoke from the fireplace, mildew from old insulation, cooking smells from inside the kitchen… But if you start noticing other strange odors coming from places they shouldn’t, like in bedrooms or hallways, there’s probably an issue with your heating system that needs fixing ASAP.
- Noisy operation
If you notice that your gas furnace is making more noise than usual, it could be a sign that it’s time to clean the fan. A dirty fan or fan motor can cause excessive vibration and noise.
- Poor Indoor Air Quality
If you notice that your home or office has poor indoor air quality, this may be due to a dirty filter or other parts of your furnace. A dirty filter will reduce the effectiveness of your system and cause poor air quality.
How To Clean A Furnace?
The furnace is one of the most important parts of your home. It heats up your entire house and keeps you warm during the cold months. However, you need to take good care of it so that it can last longer. If you don’t know how to clean furnace flame sensors or how to clean furnace coils, then this section is for you. Here are some general steps involved in cleaning a furnace:
Step 1: Turn off the Power
If you have a gas furnace, turn off the power to the unit. If you have an electric furnace, unplug it from its power source.
Step 2: Clean or Replace the Air Filter
If your filters are dirty, clean them by vacuuming them or brushing them with a soft brush. If they appear worn out, change them with new ones that are invented for your specific unit. If your filter is damaged, replace it immediately to avoid further damage to your equipment.
Step 3: Clean the Blower Motor And Fan
Every two months, you should remove the cover and clean the blower motor and fan with a vacuum or compressed air. Remember to check for any obstructions that may be preventing proper airflow inside the unit.
Step 4: Clean the Burners
Once a year, use a wire brush to clean all of your burners – including the pilot light – to remove any buildup from combustion gases or dust accumulation. This will help prevent fires and improve efficiency by allowing more oxygen flow into your system.
Step 5: Inspect And Clean the Heat Exchanger
This is the part where the air gets heated, so you want to make sure it’s clean. Make sure there aren’t any obstructions, such as debris or spider webs. If there are, remove them with a vacuum or brush.
Step 6: Clean the Combustion Chamber
This is where your furnace burns fuel and heats the air before sending it up through your home or office building ducts. Make sure this area is clean so that there aren’t any obstructions that could inhibit airflow or cause fires when burning fuel.
Step 7: Check and Clean the Flue Pipe
The flue pipe is what carries the byproducts of combustion up through your home and outside. If it gets clogged or damaged, it will impede airflow and start causing problems with your system. To check it, remove any debris from the top of the flue pipe (you’ll find it going up through your ceiling).
If there’s any buildup inside that looks like ash or soot, use a wire brush or other abrasive tool to remove it. Then, take a vacuum cleaner hose and run some warm water down through the hose, followed by compressed air—this will help clear out any remaining debris from inside the pipe. Finally, replace any insulation that has come loose or been damaged during this process.
Step 8: Reassemble and Restore Power
When you’re done cleaning the flue pipe, reassemble it and restore power to your furnace. This is typically done by turning off your breaker box, removing screws from a panel on the back of your furnace, then reconnecting them once everything is plugged in again.
How Much Does It Cost For A Furnace Clean In Calgary, Alberta, Canada?
It can be very difficult to know how much you should pay for a furnace clean. There are so many variables that affect the price, including the size of your furnace, the type of filtration system, whether or not you have a humidifier, and so on. However, we’ve done some research and have come up with an average price range for a full-service furnace cleaning in Calgary.
The average cost of furnace cleaning in Calgary is $100-$200. This includes all materials used during the cleaning process and any additional fees such as transportation costs or extra time spent at your home if it’s more than one hour away from our office.
How Often Should the Furnace Be Cleaned?
Your furnace is one of the most important parts of your home – it keeps your home hot during the winter and chills during the summer, which means it’s crucial that it’s always running smoothly. So how often should you clean your furnace?
The answer is: it depends on how often you use it. If you use your furnace daily, you should clean it at least once a year. If you don’t use your furnace very often, then once every two years may be sufficient. The best way to know for sure when it’s time to clean your furnace is to pay attention to how long it takes for the temperature in your house to stabilize after turning on the heat or air conditioning. If it takes longer than 30 minutes for things to feel normal, then there may be something wrong with your system, and a professional expert for furnace Repair in Calgary should check it out.
What Are The Benefits Of Furnace Service?
It’s not just about the money. When you schedule a furnace service, you’re also doing something good for your home. Here are some of the benefits:
- Improved Performance
Having your furnace serviced is a great way to make sure it’s working at its peak efficiency. This means that your home will be more comfortable and energy efficient, which can save you money on heating bills long into the future.
- Extended Lifespan
Keeping up with regular maintenance can extend the life of your furnace by as much as 10%. That means fewer replacements, lower energy bills, and more money in your pocket.
- Peace of Mind
When you know that all of your equipment is operating properly and efficiently, it makes you feel safe and secure. You’ll never have to worry about being surprised by a broken part or having to pay out big bucks for emergency repairs.
- Enhanced Safety
The most important benefit of furnace service is that it enhances your safety. The device will be more efficient and able to provide you with cleaner air and better indoor comfort. Additionally, if there are any problems with the furnace, they will be caught early on before they become major issues that could cause injury or even death.
- Warranty Protection
If you have a warranty on your furnace, regular service can help ensure that any issues are discovered before they become more costly or dangerous.
- Improved Efficiency
Because furnaces need to be cleaned, inspected, and maintained in order to operate best, regularly scheduled furnace service can help improve your efficiency and reduce energy costs.
Call A Professional Furnace Repair And Furnace Cleaning Expert In Calgary!
Furnaces are one of the most important systems in your place, and they have to be adequately maintained to keep your family safe. If you’re not sure if your furnace is working properly, it’s time to call ClearView Services – a Calgary-based company you can trust for all of your furnace repair and maintenance needs.
We’re ClearView Services and here to help you with Furnace Cleaning and Services in Calgary. If you have a furnace that’s running poorly or it’s just not working at all, we have the required expertise and skills to get it back up to snuff.
Our technicians are trained in all makes and models of furnaces, so no matter what kind of furnace you have, we’ve seen it before. Our technicians will inspect your furnace and make sure it’s operating safely by performing routine checks on the following components:
- Air filters
- Blower motor
- Ignition system
- Combustion blower motor, flame sensor, limit switch, or another safety device
We also offer free estimates on all repairs and service calls, so you’ll always know what’s going on with your heating system before deciding whether or not to opt for any work that needs to be done.
The best thing? We have access to the best products on the market and use them to clean your system from top to bottom. With our help, you’ll be able to enjoy lower energy bills, less wear-and-tear on your system, and fewer breakdowns.
Give us a call today at 587-741-1562 to schedule a meeting with our furnace repair and cleaning experts.
